一、进口插入式涡轮流量计概述

插入式涡轮流量计传感器是一种精密流量测量仪表，与相应的流量积算仪表配套可用于测量液体的流量和总量。广泛用于石油、化工、冶金、科研等领域的计量、控制系统。

插入式涡轮流量计结构为防爆设计，可以显示流量总量，瞬时流量和流量满度百分比。电池采用长效锂电池，单功能积算表电池使用寿命可达5年以上，多功能显示表电池使用寿命也可达到12个月以上。

插入式涡轮流量计可以显示的流量单位众多，有立方米，加仑，升，标准立方米，标准升等，可以设定固定压力、温度参数对气体进行补偿，对压力和温度参数变化不大的场合，可使用该仪表进行固定补偿积算。

插入式涡轮流量计具有结构简单、轻巧、精度高、复现性好、反应灵敏，安装维护使用方便等特点的新一代涡轮流量计，广泛用于测量封闭管道中与不锈钢1Cr18Ni9Ti、2Cr13及刚玉Al2O3、硬质合金不起腐蚀作用，且无纤维、颗粒等杂质，工作温度下运动粘度小于5×10m/s的液体，对于运动粘度大于5×10m/s的液体，可对流量计进行实液标定后使用。若与具有特殊功能的显示仪表配套，还可以进行定量控制、超量报警等，是流量计量和节能的理想仪表。

The plug-in turbine flowmeter sensor is a precision flow measurement instrument that can be used to measure the flow rate and total amount of liquids in conjunction with corresponding flow accumulation instruments. Widely used in measurement and control systems in fields such as petroleum, chemical, metallurgy, and scientific research.

The structure of the plug-in turbine flowmeter is explosion-proof design, which can display the total flow rate, instantaneous flow rate, and full flow percentage. The battery adopts a long-lasting lithium battery, and the service life of a single function cumulative meter battery can reach more than 5 years, and the service life of a multifunctional display meter battery can also reach more than 12 months.

The plug-in turbine flowmeter can display a wide range of flow units, including cubic meters, gallons, liters, standard cubic meters, standard liters, etc. It can set fixed pressure and temperature parameters to compensate for gases. In situations where the pressure and temperature parameters do not change much, this instrument can be used for fixed compensation accumulation.

The plug-in turbine flowmeter is a new generation turbine flowmeter with the characteristics of simple structure, lightweight, high accuracy, good reproducibility, sensitive response, and easy installation, maintenance, and use. It is widely used to measure closed pipelines, and is not corrosive to stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3, and hard alloys. It is free of impurities such as fibers and particles, and has a kinematic viscosity of less than 5 × 10m/s at working temperature. For liquids with a kinematic viscosity greater than 5 × 10m/s, the flowmeter can be used after real liquid calibration. If paired with display instruments with special functions, it can also perform quantitative control, over limit alarm, etc., making it an ideal instrument for flow measurement and energy conservation.

二、进口插入式涡轮流量计性能参数