温馨提醒
请输入关键词
产品介绍

一、进口拨叉式气动执行器概述

进口拨叉式气动执行器具有灵活的模块化组合设计,气动模块、液压模块、手动模块可根据现场情况任意选择、更替。分单作用、双作用两种作用形式,适用于蝶阀、球阀、旋塞阀等做90°角行程的阀门控制。

拨叉式气动执行器(英文:Scotch Yoke Pneumatic Actuator),是一种角行程活塞式气动执行机构,拨叉式气动执行器设计精巧紧凑,牢固耐用,是专门用于球阀、蝶阀、旋塞阀等适用90°转角的阀门的开关切断或调节控制。气动执行器分双作用和单作用,双作用气动执行器和单作用气动执行器其实在使用起来是差不多的,最根本的区别在于内部结构,单作用执行器多了弹簧这个零部件,所以其最大的优势在于断电后可以复位!

单作用的成本比双作用要高,单作用气动执行器(气动执行器内部有弹簧,在断开气源情况下,弹簧会自动复位,提供力量使球阀恢复到起始的开启或关闭状态),若选择双作用执行器,在断开气源情况下,执行器失去动力,阀位保持在失气一瞬间处于的那个位置。如果需要在失气情况,阀门自动复位,就选单作用执行器,如果不需要,就选双作用执行器。

The fork type pneumatic actuator has a flexible modular combination design, and the pneumatic module, hydraulic module, and manual module can be selected and replaced according to the on-site situation. There are two types of action: single action and double action, suitable for controlling valves with a 90 ° angle stroke, such as butterfly valves, ball valves, and plug valves.

The Scotch Yoke Pneumatic actuator is an angle stroke piston type pneumatic actuator. The design of the Scotch Yoke pneumatic actuator is exquisite, compact, sturdy, and durable. It is specifically used for the on-off or adjustment control of valves such as ball valves, butterfly valves, and plug valves that are suitable for 90 ° angle. Pneumatic actuators are divided into double acting and single acting. Double acting pneumatic actuators and single acting pneumatic actuators are actually similar in use, with the most fundamental difference being their internal structure. Single acting actuators have an additional spring component, so their biggest advantage is that they can be reset after power failure!

The cost of a single acting pneumatic actuator is higher than that of a double acting one. A single acting pneumatic actuator (which has a spring inside and automatically resets when the air source is disconnected, providing force to restore the ball valve to its initial open or closed state). If a double acting actuator is selected, the actuator loses power when the air source is disconnected and the valve position remains at the moment of loss of air. If it is necessary to automatically reset the valve in case of loss of air, choose a single acting actuator. If not required, choose a double acting actuator.



二、进口拨叉式气动执行器技术参数

材质:铝合金,碳钢,球墨铸铁
执行器类型:单作用气动执行器
行程:0°~90°(±5°可调)
耗气量:4.35L
重量:160Kg
气源压力:0.4~0.8MPa
环境温度:标准-20℃~+80℃、高温-20℃~+150℃、低温-40℃~+80℃
资质认证:SIL3,ISO,CE,防护等级IP67
连接标准:ISO 5211,与连接器配套附件的固定方式根据VDI/VDE3845 NAMUR
快配附件:定位器、过滤减压阀、放大器、气控阀、限位开关等




0755-29172950

13760336133

深圳名阀进出口贸易有限公司

地址:深圳市福田区深南路南光捷佳大厦2716

邮箱:fm0755@126.com

关注我们

微信联系

Copyright © 2013-2023 All Rights Reserved. 粤ICP备17016233号