温馨提醒
请输入关键词
产品介绍

一、进口自力式压力调节阀概述

进口自力式压力调节阀(美国威盾VTON),Self pressure regulating valve,也叫进口自力式压力控制阀,无需外加能源,利用被调介质自身能量为动力源引入执行机构控制阀芯位置,改变两端的压差和流量,使阀前(或阀后)压力稳定在所需要的压力值的调节阀。美国威盾VTON自力式压力调节阀具有动作灵敏,密封性好,压力设定点波动力小等优点,广泛应用于气体、液体及蒸汽介质减压稳压或泄压稳压的自动控制。

Self pressure regulating valve (VTON), also known as imported self pressure regulating valve, does not require external energy. It uses the energy of the regulated medium as the power source to introduce the actuator to control the position of the valve core, changes the pressure difference and flow rate at both ends, and stabilizes the pressure in front (or behind) of the valve at the required pressure value. The American Weidun VTON self operated pressure regulating valve has the advantages of sensitive action, good sealing, and low pressure set point ripple force. It is widely used in automatic control of pressure reduction and stabilization or pressure relief and stabilization for gas, liquid, and steam media.

美国威盾VTON自力式压力调节阀主要有控制阀后压力型和控制阀前压力型。材质有不锈钢和铸钢。



二、进口自力式压力调节阀特点

1、进口自力式压力调节阀无需外加能源,能在无电无气的场所工作,既方便又节约了能源。
2、进口自力式压力调节阀压力分段范围细且互相交叉,调节精度高。
3、进口自力式压力调节阀压力设定值在运行期间可连续设定。
4、进口自力式压力调节阀对阀后压力调节,阀前压力与阀后压力之比可为10:1~10:8。
5、进口自力式压力调节阀橡胶膜片式检测,执行机构测精度高、动作灵敏。
6、进口自力式压力调节阀采用压力平衡机构,使调节阀反应灵敏、控制精确。



三、进口自力式压力调节阀主要零件材料

阀体:ZG230-450、ZG1Cr18Ni9Ti 、ZGCr18Ni12Mo2Ti
阀芯:1Cr18Ni9Ti 、Cr18Ni12Mo2Ti 
阀座:1Cr18Ni9Ti 、Cr18Ni12Mo2Ti 
阀杆:1Cr18Ni9Ti 、Cr18Ni12Mo2Ti 
膜盖:A3、A3钢涂四氟乙烯 不锈钢 
填料:丁腈、乙炳、氟、耐油橡胶



四、进口自力式压力调节阀主要技术参数和性能指标

公称通径DN(mm):20-300
额定流量系数(KV):7-1750
额定行程(mm):8-70
公称压力PN(Mpa):1.64.06.4
压力调节范围(MP a):15-2500
流量特性:快开
调节精度(%):±5
使用温度(℃):≤350
减压比:最大(10)、最小(1.25)
允许泄漏量m1/h硬密封单座:≤10ˉ4阀额定容量(IV级);双座、套筒:≤5×10ˉ3阀额定容量(II级))、软密封(0.15-16.0)




五、进口自力式压力调节阀外形尺寸重量

公称通径:DN20-300
法兰接管尺寸B:383-220
法兰端面距L:150-850
压力调节范围kpa:14-2500
重量kg26-250
导压管接头螺纹:M16×1.5






0755-29172950

13760336133

深圳名阀进出口贸易有限公司

地址:深圳市福田区深南路南光捷佳大厦2716

邮箱:fm0755@126.com

关注我们

微信联系

Copyright © 2013-2023 All Rights Reserved. 粤ICP备17016233号